This Hand Drill machine was made by VAL D'OR in France was in very bad condition with a missing handle the first time I started with disassembling the pieces then I started cleaning the pieces with grinding drums with metal wire That took me about 5 hours of hard work after I made the missing handle from a piece of wood found through the workshop. to make the wood more resistant I used parquet flooring. After grinding the pieces I used alcohol for degreasing. For painting I used a pre-loaded spray with a metallic gray paint, special paint for car rims, I applied four coats of paint. For the central part I used a black anti-rust paint. After 24 hours I started assembling the pieces.