Meet the amazing MMX Cad Team on the Wintergatan Discord server: https://discord.gg/wintergatan Check Out Maureens Youtube Channel: https://www.youtube.com/watch?v=Qyim_... Check out Tim Kellers Youtube Channel: https://www.youtube.com/watch?v=L9GGr... In this episode I am building what I hope will be “the beginning to the end” - the new Marble Module. Next step for me is to cad & manufacture the continuation of the marble paths from the module out to the channels and later assemble this solution on the machine. Inspiration levels are high in the studio today. I am using time correctly and the community are pushing the CAD model which will take the MMX on a new adventure into the future. Have a nice day everyone and good luck with everything you are doing! / Martin P.S. I explained the non-concentric misalignment inside the video but we edited that part out so for the machining interested: The plywood stock was undersized - designed the cad for 18mm thickness of the ply but didnt care to check the ply stock size. the IRL thickness was surprisingly off - much thinner than 18mm causing the misalignment (birch ply have higher quality in sweden then the ply i have found in france). Rookie mistake, measure your stock by yourself - dont take the 18mm for granted just because it says on the package... Video edited by Hannes Knutsson and Marius Ihlar https://instagram.com/hannesknutsson https://www.mariusfilm.com/